[通知Notification] 曲线都问题 Curve degree issue

In this forum we will posts update, news and similar topics.
Post Reply
User avatar
orca
Posts: 83
Joined: Thu Jan 24, 2019 9:41 am
Location: Treviso
Contact:

Fri Nov 15, 2019 11:44 am

Dear all,

Hello, this topic is to notify everybody that there is an issue with the curve creation tool that has been immediately addressed by the team.

For now, please make sure to use Degree 3 when creating and editing a curve. Using a different Degree will cause issues with the points and the editing.

Rhino uses Degree 3 as default, but to make sure you are using Degree 3 curves please click on the Draw tool and check the command bar:
Image
Important notes:
  • Curve Degrees can only be an odd number. Degree 1 is a polygonal line, then there is 3, 5, 7, etc.
  • There is a command called _ChangeDegree that will let you change the Degree of curves outside of the Draw Command
_____ _____ _____ _____

大家好

本主题旨在通知所有Jevero用户:有一个曲线创建工具的问题,团队已经开始解决了。

目前,当创建和编辑曲线的时,请大家只使用3度。 使用不同的度会出现问题。

Rhino默认使用3度,但是要确保使用度数3曲线,请单击Draw工具并检查命令栏:
Image
重要笔记:
  • 曲线度只能是奇数。 度1是一条折线,然后有3、5、7等。
  • 有一个名为 _ChangeDegree 的命令,可让您更改曲线的度数
thank you everybody for the attention
谢谢大家的关注
SUPPORT EMAIL: info@jeveropattern.com

Federico Trentin
费德利
Jevero Support Team Member - Jevero支持团队成员
spg_cammy
Posts: 6
Joined: Thu Jan 24, 2019 7:49 am

Fri Feb 28, 2020 4:13 am

:mrgreen: :mrgreen:
up up up
Sent from my office's computer,
Cammy :mrgreen: :mrgreen: :mrgreen:
Post Reply