Create the boundary for hole upper

In this section you will be able to share knowledge and workflows about jevero
Post Reply
Lu Vu
Posts: 11
Joined: Fri Feb 01, 2019 9:30 am

Sat Jun 22, 2019 9:14 am

Hi improvement team JEVERO
I want to create the boundary on shape insole as picture
Please support me create the upper hole of model flip flop
I using right click of the boundary
Thank you
(95.4 KiB) Downloaded 171 times
Posts: 10
Joined: Fri Jul 20, 2018 2:49 pm

Mon Jun 24, 2019 7:10 am

Hi Lu Vu,
I created a similar situation as yours and I was able to quickly create the desired result. I am not real sure what is your issue. What I have is a margin on the strobel/fussbett line (similar to what I see from your images) and I simply created the boundary taking that and the back part of the strobel.

I like to create my radii first so that I can reuse them and properly put them where I want them to be. You can create them later after the boundary.


If you have doubt please share with us your file so we can take a look and help you further. You can send the file to

Lu Vu
Posts: 11
Joined: Fri Feb 01, 2019 9:30 am

Mon Jun 24, 2019 9:24 am

Hi Alberto
Thank you so much for help me.
User avatar
Posts: 83
Joined: Thu Jan 24, 2019 9:41 am
Location: Treviso

Mon Jun 24, 2019 12:17 pm

Dear Lu Vu,

hi, hope this could help you solve your issue. Remember that the lines forming the boundaries must be connected one to another in order to create the boundary, so make sure you don't have many lines overlapping or slightly moved. If that happens, first of all check if there are pieces missing!

Have a great day,

Best regards,


Federico Trentin
Jevero Support Team Member - Jevero支持团队成员
Post Reply